Cobra 100w Hps Street Light

Cobra 100w Hps Street Light

Cobra 100w hps street light SAPPHIRE.HPS Key featuresHigh performance photometryIP 66 Sealsafe庐 maintained over timeEasilok庐 closure systemEasy maintenanceRobust and recyclable materials Applications Urban roads and streetsRoads and highwaysResidential streetsLarge areasCar parksSquares and...

Send InquiryChat Now

Cobra 100w  hps street light 

SAPPHIRE.HPS

 

Key featuresHigh performance photometryIP 66 Sealsafe庐 maintained over timeEasilok庐 closure systemEasy maintenanceRobust and recyclable materials

Applications Urban roads and streetsRoads and highwaysResidential streetsLarge areasCar parksSquares and pedestrian areasRoundabouts

EcosystemsRoad + UrbanCampus

 

CHARACTERISTICS:

HIGH PHOTOMETRIC EFFICIENCY

The Sapphire range can be equipped either with a reflector made from synthetic material covered with a layer of highly pure vacuum-applied aluminium (Sapphire 1/2) or with a reflector in deep drawn, polished and anodised aluminium Sapphire 1/2/3).

These reflectors are particularly suited to quasi point source arc tube lamps and offer high photometric efficiency.

In order to adapt the photometry, the lamp is adjustable.

 

GLASS PROTECTOR

High impact resistance thanks to thermal tempering. Consistency in the level of transparency: absence of yellowing, immune to electrostatics. The characteristics are a determining element for the high maintenance factor of the optical compartment.


SEALSAFE

The Sealsafe system is a source of energy and maintenance cost savings.

It guarantees an IP 66 tightness level for the optical compartment maintained over time. The system is based on the principle of a reflector that is permanently sealed to the protector and in which the lamp is accessed only by rotating/removing the plug equipped with an ultra-short gasket. The tightness level of the enclosure housing the optical compartment must be at least IP 44.


EASILOK

Only available as an option on the Sapphire 1 and 2, with reflectors made from synthetic material (1632/1720/1523). By lowering the locking handle, this locking system automatically positions and immobilises the plug. Access to the lamp by lifting the locking handle. This simple action removes the plug and disconnects the power supply.

 

OPTIONS

FINISHING

Any RAL or AKZO colour

 

SAPPHIRE 1 + 2

IP 65 tightness level of the body with aluminium cover

Cover in grey polyproplene

Photoelectric cell

Polycarbonate protector treated to withstand UV rays (max. 150W) or in acrylic (max. 100W)

Flat glass protector for lamps up to 250W

Internal adaptor for vertical mounting at

Removable control gear plate in galvanised steel

Anti-glare louvres

Easilok locking system (only with reflectors 1632, 1720 and 1523)

 

SAPPHIRE 3

IP 65 tightness level of the body

Flat glass protector

Internal adaptor for vertical mounting at 0掳

 

PHOTOMETRY:

The Sapphire range can be equipped either with a reflector made from synthetic material covered with a layer of highly pure vacuum-applied alumiunium (Sapphire 1/2) or with a reflector in deep drawn, polished and anodised aluminium (Sapphire 1/2/3). 

These reflectors are particularly suited to quasi point source arc tube lamps and offer high photometric efficiency.
In order to adapt the photometry, the lamp is adjustable.

 

INSTALLATION

An universal mounting piece allows vertical or side-entry installation. 
The luminaire is mounted using 2 M8 Allen screws.

Side-entry mounting
Vertical mounting

 

MAINTENANCE

EASY MAINTENANCE

The Sapphire luminaire is opened via the three-point closure system located on the cover. The Sapphire is equipped with the Easilok locking system which guarantees the tightness of the optical compartment and disconnects the power and automatically switches off the ignitor when the plug is removed.
By lowering the locking handle, the locking system automatically positions and immobilises the plug. Access to the lamp is gained by lifting the locking handle. This simple action removes the plug and disconnects the power supply.

SAPPHIRE.HPS.YY.jpg


ORDERING INFORMATION : 

Beam on one side

image003.png

Item No.

Series

Lamp

Socket

Power

Material

Diffuser

Votage

ST0800SPH.365   

SAPPHIRE800

 MH/HPS

E27

400W Max.

Aluminum

PC

220-240V


PACKING DETAILS:



Body size-mm

Carton size-cm

Item No.

Series

A

B

C

L

W

H

Q'ty/CTN

ST0800SPH.365

SAPPHIRE800




53.5

52

55

1


Hot Tags: cobra 100w hps street light, China, suppliers, manufacturers, factory, wholesale
Related Products
Inquiry