Home > Knowledge > Content
How to install the LED wall lamp install the LED wall lamp and pay attention to the main points
- Mar 08, 2018 -

No LED lamp can be installed directly in the combustible material. Some families, for the sake of beauty, are lined with painted three plywood on the back of the sky lantern. In fact, this is very dangerous. Insulation measures must be taken. If the high temperature part of the lamp is near the combustible, heat insulation or heat dissipation measures should also be taken.

Connecting wire and lamp lamp, LED lamp cup between parallel conductors connected to the firm, the electrical contact should be good, not because of bad contact, sparks float to the surface between the conducting wire and wire end, and dangerous.

LED Cup before installation should also check to each section of the wire core lamp, copper cord is not less than 0.4mm2, the copper core is not less than 0.5mm2, otherwise lead to change.

If you need to use LED cup expansion bolt, the bolt should be selected according to the technical requirements of product specifications, the hole diameter and buried depth should be consistent with the specification of the bolt.