Home > Knowledge > Content
What are the precautions when installing street lights?
- Nov 23, 2018 -

First of all, when the installation position is different, it should also be noted that if the installation in the northern hemisphere leads to the direction of the street light, the solar panel should be oriented as far as the south or the light receiving surface to obtain the maximum energy. If in the southern hemisphere, install as much as possible. Orient the solar panel toward the north or the light receiving surface. According to the actual engineering needs, choose the best location for installation and install solar street lights along the road.


Then, during the excavation process, the size of the pit is determined according to the requirements. Before the foundation construction, the local regulations should be followed to investigate the geological conditions. If the surface is soft soil, the excavation depth should be deepened. In the process of pouring the street lamp base, the next step is to be carried out after 2-4 days of solidification. During the concrete solidification process, watering should be carried out regularly, and the concrete should be completely solidified before installation.

What are the precautions when installing?

1) Remove the package and check the accessories;

2) Connect the external waterproof connector to test whether the lamp can work normally;

3) Fasten the rear seat of the lamp to the appropriate height of the pole.

Finally, in order to ensure the beauty and battery components can better receive the amount of solar energy, you can clean the dust, leaves or other impurities on the battery components every six months. In areas with heavy dust or bad environment, the maintenance frequency can be shortened depending on the situation.