Here are general steps for installing an LED ceiling light:
1.Turn off the power to the circuit at the circuit breaker or fuse box.
2.Remove the old light fixture and its mounting bracket, if present. Disconnect the wires by unscrewing the wire nuts and separating the wires.
3.Remove the old electrical box if it is not rated to hold the weight of the new LED ceiling light. Install a new electrical box that is rated to support the weight of the new LED light and secure it to the ceiling joist with screws.
4.Install the mounting bracket of the LED ceiling light onto the electrical box using screws.
5.Connect the wires of the LED ceiling light to the wires in the electrical box, following the manufacturer's instructions. Typically, the white wire connects to the white wire, the black wire connects to the black wire, and the green or bare wire connects to the ground wire.
6.Tuck the wires into the electrical box and attach the LED ceiling light to the mounting bracket using screws.
7.Install the LED bulbs into the light fixture following the manufacturer's instructions.
8.Turn the power back on at the circuit breaker or fuse box and test the light to make sure it is working properly.
Note: These are general steps and the specific installation process may vary depending on the manufacturer's instructions and the design of the LED ceiling light. If you are not comfortable with electrical work, it is recommended to hire a licensed electrician to install the LED ceiling light.
CARMEN Wholesale Top Seller Small Wireless Waterproof Wall Outdoor LED Light
27W ceilling Led Garden Wall Surface Light CARMEN140.LED.CM CARMEN140.CM is the ceiling wall mounted type for CARMEN140 series. It is feature to be IP65 water proof and 5mm thickness temper glass on its surface. and Power 9LEDs in 27W.
Surface wall mounted type light designed for wall surface installation. Die casting aluminum body and clear/frost temper glass as its' diffuser.
Available in various finishes: white, grey, black, etc.,